San Jose Water Heater Specialist
Tank to Tankless Water Heater Conversion in San Jose, CA
Updated • By Joseph Castro, Owner • Licensed CSLB #1008381
We convert San Jose storage tanks to wall-hung condensing tankless — including the gas-line upsizing, new PVC venting, condensate drain, and City of San Jose permit that most conversions actually require.
- Licensed CSLB #1008381
- Navien Certified Installer
- Gas-Line Upsizing In-House
- SJ Permit Pulled
- Same-Week Conversions
- 1-Year Labor Warranty

What this service covers
San Jose conversions are rarely a simple swap. A 40-gallon tank draws 40,000 BTU; a whole-house condensing tankless draws up to 199,000 BTU. That gap — plus the switch from metal B-vent to sealed PVC venting — is where most of the work lives across the 95110–95148 footprint.
- Gas load calculation per CPC Table 1215.2 against your meter and pipe run
- Gas branch upsizing from 1/2" to 3/4" or 1" black iron / CSST
- PG&E meter upgrade coordination when the 250 CFH meter is undersized
- Removal and haul-away of the old storage tank
- Sealed 2"/3" PVC or polypropylene concentric venting, B-vent capped
- Condensate drain with neutralizer cartridge
- Service isolation valves for future descaling
- Recirculation setup (Navien ComfortFlow or external pump)
- Electrical outlet for the unit's 120V control board
- City of San Jose Development Services permit and inspection
How We Convert San Jose Homes from Tank to Tankless
Photo scope + gas load math
Send photos of the tank, gas meter, and vent. We measure the developed length from meter to heater and confirm whether your existing 1/2" line can carry tankless BTU — in pre-1980 Willow Glen and Cambrian homes it almost never can.
Gas upsizing + PG&E check
We rerun a dedicated 3/4" or 1" branch and, if the total house load exceeds the meter rating, open a PG&E meter-upgrade request before install day so you're not left without hot water.
Install, vent, condensate
Wall-mount the unit, run sealed PVC venting to code clearances (4 ft from openings, 12" above grade), cap the abandoned B-vent, plumb condensate with a neutralizer, and add isolation valves.
Permit, inspect, register
We pull the San Jose permit, meet the inspector, register the manufacturer warranty (up to 15-yr heat exchanger), and walk you through recirc and descaling.
What we do on the job
Every San Jose conversion follows the same checklist — the one most failed inspections trace back to.
- Clock the gas meter at full load to confirm actual CFH
- Size gas pipe by developed length, not just distance
- Confirm sediment trap and drip leg at the unit
- Vent termination 4 ft from operable windows and doors
- Seal and cap abandoned B-vent through roof or wall
- Neutralize condensate before indirect waste
- Install isolation valves for annual descaling
- Set outlet temperature to 120°F to limit scale on SJ water
- Test minimum-flow activation at every fixture
- Leave the permit card signed off on site
Why Tank-to-Tankless Conversions Look Different in San Jose
San Jose's housing eras each change the scope. 1920s Willow Glen and Rose Garden bungalows have long 1/2\" black-iron runs from a front-yard meter. 1950s Cambrian ranches tuck the tank in an interior closet with atmospheric B-vent. 1970s Almaden Valley and Evergreen tract homes put it in the garage — the easiest conversion. Newer North San Jose and Berryessa townhomes often have tight closets where a wall-hung unit frees up floor space.
- Willow Glen (95125): gas upsizing on nearly every conversion
- Cambrian (95124/95118): closet tanks relocated to an exterior wall
- Almaden Valley (95120): straightforward garage conversions
- Evergreen (95135/95148): code-correction on old venting during the swap
- Berryessa (95131): townhome direct-vent through side walls
- San Jose Water hardness (~6–10 gpg) makes annual descaling worthwhile
- BAAQMD 2028 rule: condensing tankless options vs heat pump explained
- PG&E tiered gas rates factored into payback math
City Overview • Santa Clara County
Tank to Tankless Water Heater Conversion in San Jose, CA — At a Glance
San Jose is our home market — we run 15+ water heater jobs per week across the 95110–95148 footprint. Every era of San Jose housing has its own quirks: 1920s Willow Glen bungalows almost always need gas-line upsizing for tankless, Almaden Valley slab-on-grade garages have their own seismic strapping approach, and 1970s Evergreen tract homes commonly need code-correction work on venting and expansion tanks during any replacement.
Permits pulled with
San Jose Development Services
Utility
PG&E gas & electric
Local climate
Mediterranean — mild winters, dry summers; garage tanks rarely freeze
Housing stock we work on
1920s Willow Glen craftsman • 1950s Cambrian ranch • 1970s Almaden tract • modern North SJ townhome
ZIP codes covered
- 95110
- 95112
- 95116
- 95118
- 95120
- 95124
- 95125
- 95126
- 95128
- 95129
- 95131
- 95135
- 95148
Nearby landmarks
Santana Row • Downtown SJ • Almaden Lake
San Jose — Frequently Asked Questions
Which San Jose ZIP codes do you cover?
Every San Jose ZIP from 95110 through 95148, including 95110 Downtown, 95112 Japantown, 95116 East San Jose, 95118 Cambrian, 95120 Almaden Valley, 95124 Willow Glen–Cambrian, 95125 Willow Glen, 95126 Rose Garden, 95128 Burbank–Valley Fair, 95129 West San Jose, 95131 Berryessa, 95135 Evergreen, and 95148 Silver Creek.
Do San Jose water heater jobs require a permit?
Yes. San Jose Development Services requires a plumbing permit for every water heater replacement and installation — including like-for-like tank swaps. Inspection covers CPC 507.2 seismic strapping, expansion tank, T&P discharge, combustion air, and vent clearance. We pull the permit and coordinate the inspection.
How fast can you get to my San Jose neighborhood?
Willow Glen, Cambrian, Rose Garden, and Downtown typically see a tech within 2–4 hours. Almaden Valley, Evergreen, Berryessa, and Silver Creek are on 3–5 hour windows depending on the day. Same-day is available across all 13 ZIPs when scheduling allows.
Do you understand San Jose's older housing stock?
Yes. We work daily in 1920s Willow Glen craftsman bungalows with half-inch black-iron gas mains, 1950s Cambrian ranches with atmospheric-vent tanks in closets, 1970s Almaden tract homes with garage installs, and modern North San Jose townhomes with tankless conversions. Each era needs a different scope.
Should You Convert Your San Jose Tank to Tankless?
Scope of work
Keep a tank: Like-for-like swap
Convert to tankless: Gas upsizing + new venting
Heat pump instead: 240V/30A circuit + condensate
Hot water supply
Keep a tank: Runs out after 40–50 gal
Convert to tankless: Continuous at 7–9.5 GPM
Heat pump instead: Tank-limited; slower recovery
Lifespan
Keep a tank: 8–12 yrs on SJ water
Convert to tankless: 18–22 yrs with descaling
Heat pump instead: 13–15 yrs
Space
Keep a tank: Floor footprint
Convert to tankless: Wall-mounted, frees closet
Heat pump instead: Needs 700+ cu ft or louvers
2028 BAAQMD outlook
Keep a tank: New gas tanks restricted
Convert to tankless: Check unit NOx rating with us
Heat pump instead: Fully compliant
Tankless Units We Use for San Jose Conversions
Navien NPE-240A2 and NPE-180A2 are our go-to conversion units because their 1/2\" gas capability and 2\" PVC venting fit San Jose's older homes. We also install Rinnai RU199, Noritz NRCP, and Rheem RTGH. See our Navien San Jose page and the tank vs tankless comparison.
Service hub
Broader tank to tankless water heater conversion coverage in San Jose.
Closest city pages
Nearest city hubs by drive time from San Jose.
Frequently asked questions
Ready to Go Tankless in San Jose?
Call (669) 337-9311 or text photos of your tank, gas meter, and vent to (408) 470-0191. We'll confirm gas sizing and give a fixed conversion price.
- Licensed CSLB #1008381
- Bonded & Insured
- Open 24/7
Navien Service Specialist · Rinnai PRO · Noritz Certified
