Heat Pump Water Heater Installation in Palo Alto, CA
Efficient Water Heaters, Inc. installs heat pump water heaters in Palo Alto, CA, replacing gas or electric tanks in Eichlers, older Craftsman homes and newer builds. Palo Alto homeowners can use their own contractor and still claim City rebates through the Rebate Hub. We plan the electrical work, pull the permit and answer 24/7.
Call or text (669) 337-9311 · Get a phone estimate
Owner experience since 1997 · Licensed since 2015 (CSLB #1008381) · Bonded & Insured · Open 24/7 · Navien Service Specialist



Using your own contractor with Palo Alto's heat pump rebates
The City of Palo Alto runs Electrify My Home, which offers a full-service option with the City's own contractor, an emergency and fast service option, and a Rebate Hub for homeowners who choose their own contractor (City of Palo Alto heat pump water heater program). We work through the Rebate Hub path.
The order matters. The City says to submit a rebate reservation with photos of the appliance being replaced before you install. Once approved, usually within about 5 business days, funds are held for up to 120 days. After the final inspection, the final application with invoices and proof of inspection is due within 90 days (Palo Alto Rebate Hub). We help you line up the paperwork so nothing is missed.
How a heat pump water heater works and why it saves energy
A heat pump water heater pulls heat from the air around it and moves it into the tank, much like a refrigerator working in reverse. Palo Alto says this makes two to three times as much heat for the energy used, and that City electricity is already carbon neutral (City of Palo Alto).
ENERGY STAR notes that a heat pump unit should go in a space that stays between 40 and 90 degrees Fahrenheit, with about 1,000 cubic feet of air around it, and that it cools the space slightly while it runs (ENERGY STAR heat pump water heaters). Most Palo Alto garages meet that easily, while small Eichler utility closets may need louvered doors or ducting. The City's program offers 50-, 65- and 80-gallon tanks, and a family of 4 usually does well with 65 gallons.
120-volt or 240-volt: matching the unit to your Palo Alto panel
Many older Palo Alto homes have 100-amp panels. A standard 240-volt heat pump water heater needs a dedicated 30-amp circuit, which may not fit. Plug-in 120-volt models need far less power, and the City's program offers 65- and 80-gallon 120-volt units for homes without spare panel capacity (Palo Alto heat pump water heater FAQs).
We look at your panel, your hot water use and the space before recommending one, whether you live in a College Terrace cottage or a larger Crescent Park home. The Rebate Hub also lists add-on rebates for wiring and panel upgrades, which can help when a 240-volt unit is the better fit.
Heat pump vs gas tank vs tankless in Palo Alto
Here is how the options compare for a typical Palo Alto home on CPAU electric and gas service.
| Option | Energy source | What to know in Palo Alto |
|---|---|---|
| Heat pump water heater | Carbon-neutral City electricity | Largest City rebate path; needs air space and a condensate drain |
| Gas tank | Natural gas | Allowed until the 2028 Bay Area zero-NOx rule takes effect |
| Tankless gas | Natural gas | Needs larger gas supply and venting; also affected by the 2028 rule |
| 120-volt heat pump | Standard outlet | Fits homes with no spare panel space |
Our Palo Alto heat pump installation process, step by step
A typical gas-to-heat-pump switch in 94301, 94303 or 94306 runs like this.
- Text photos of your current heater, its model plate, the space around it and your electrical panel to (669) 337-9311.
- We confirm the size, the 120-volt or 240-volt option and any circuit work, and give a written estimate.
- You reserve the rebate on the Rebate Hub with photos of the old heater, and we pull the City permit.
- On install day we cap the gas line, remove the old tank and set the heat pump unit on seismic straps.
- We wire the circuit, run the condensate drain and relief line, connect the water lines and start the unit.
- After the City final inspection, we give you the invoice and inspection proof for the final rebate application.
Is a heat pump water heater safe and quiet enough for a garage or closet?
Yes. A heat pump water heater has no flame, no combustion and no flue, so the unit makes no carbon monoxide. The compressor makes a low hum like a refrigerator, so in Palo Alto Eichlers, where the water heater often sits in a closet near bedrooms, we look for a garage spot or add sound-damping pads. A drain pan helps too.
California still requires new and replacement water heaters to be strapped against earthquakes, and the state guide places straps in the top and bottom thirds of the tank (California Seismic Safety Commission).
How often does a heat pump water heater need service?
Plan on a yearly check every 12 months, and clean the air filter about every 3 months, since a clogged filter cuts efficiency. Each year we flush the tank, test the relief valve, clear the condensate drain and check the anode rod. Palo Alto's soft Hetch Hetchy water from CPAU keeps sediment light, so tanks here stay cleaner than in San Jose.
What changes the cost of a Palo Alto heat pump installation?
We give a written price after we see the space and the panel. The CPAU rebate is separate and depends on your Rebate Hub reservation, and add-on rebates can cover some wiring or panel work. In Palo Alto, most of the price comes down to the unit and the electrical work. The main cost factors are:
- Tank size and 120-volt versus 240-volt model
- A new circuit, breaker space or panel work
- Condensate drain or pump and relief line routing
- Louvered doors or ducting for a small closet
- Capping the gas line, the permit and haul away of the old heater
Heat pump water heater installation across Palo Alto
We install heat pump water heaters across Palo Alto, from Crescent Park, Old Palo Alto and Professorville to Midtown, Barron Park, Greenmeadow and the Eichler tracts near Charleston Road. Our San Jose shop at 240 Bayview Ave reaches Palo Alto by Highway 101. Comparing a gas replacement first? See water heater replacement in Palo Alto and water heater repair in Palo Alto.
Palo Alto heat pump water heater FAQs
Can I use my own contractor and still get Palo Alto's heat pump rebate?
Yes. Electrify My Home includes a Rebate Hub for Palo Alto homeowners who choose their own contractor. Reserve the rebate with photos of your old heater before the install, finish within the 120-day reservation window, then submit the final application within 90 days of passing the City final inspection.
How much does heat pump water heater installation cost in Palo Alto?
It depends on the tank size, a 120-volt or 240-volt model, any circuit or panel work, condensate routing and the City permit. CPAU rebates reserved through the Rebate Hub lower the net cost. Efficient Water Heaters, Inc. gives a written estimate first; text photos of your heater and panel to (408) 470-0191.
Do I need a permit for a heat pump water heater in Palo Alto?
Yes. Replacing a water heater in Palo Alto needs a City building permit and a final inspection, and the Rebate Hub asks for proof of that inspection with your final rebate application. Efficient Water Heaters, Inc. pulls the permit, meets the inspector and gives you the paperwork the City asks for.
How long does a heat pump water heater installation take?
Most Palo Alto installs take 1 day once the permit is ready. The City's own program tells homeowners to expect about 6 to 8 hours without hot water. Jobs that add a new 240-volt circuit, a condensate pump or closet ducting can run a little longer, and we tell you before we start.
Will a heat pump water heater work with an older 100-amp panel?
Often, yes. Many 1950s Eichler and older Palo Alto homes have 100-amp panels. A 120-volt plug-in model uses far less power and can run from a standard outlet circuit. If you want a 240-volt unit, we check whether the panel has room for a dedicated 30-amp circuit first.
How often should a heat pump water heater be serviced in Palo Alto?
Once every 12 months, plus an air filter cleaning every 3 months or so. The yearly visit covers a tank flush, a relief valve test, a condensate drain check and an anode inspection. Palo Alto's soft Hetch Hetchy water keeps sediment light, so the flush is usually quick.
Is a heat pump water heater safe?
Yes. A heat pump water heater has no flame and no combustion, so the unit itself produces no carbon monoxide, which the City of Palo Alto lists as a safety benefit. It still needs seismic straps, a relief valve discharge line and a condensate drain installed to code, which the City inspector checks at the final.
Plan your Palo Alto heat pump water heater installation
Call (669) 337-9311 or text photos of your heater and panel. We also install in nearby Menlo Park, Los Altos and Mountain View. You can check CSLB #1008381 on the state license site.
Call or text (669) 337-9311 · Get a phone estimate · Efficient Water Heaters, Inc. on Google Maps
