Igniter Replacement • Cupertino
Water Heater Igniter Replacement in Cupertino
Updated • By Joseph Castro, Owner • Licensed CSLB #1008381
Many Cupertino homes have high-efficiency tankless or condensing water heaters, and those rely on electronic ignition. When the igniter fails, you get no hot water at all — so we focus on finding the failed part quickly and restoring ignition in one visit.
- Licensed CSLB #1008381
- Same-Day Service When Available
- Piezo, Spark & Hot-Surface Igniters
- Tank & Tankless
- Upfront Diagnosis
- 4.8★ from 370 Google Reviews

What this service covers
Cupertino igniter calls often involve premium equipment. Here's what we typically handle.
- Hot-surface igniter testing and replacement on tankless and condensing units
- Spark electrode replacement and gap adjustment
- Flame rod cleaning and replacement
- Ignition module and control board testing
- Gas pressure checks on long hillside gas lines
- Descaling when scale is causing overheat lockouts
- Exterior-mounted unit inspection for weather and pest damage
- Piezo igniter replacement on standard garage tanks
Our Cupertino Ignition Repair Process
Pull the code history
We check stored codes to see if ignition failures are new or recurring.
Test the igniter directly
Hot-surface igniters are checked for resistance and glow; spark igniters for arc strength and gap.
Measure gas pressure at full fire
Hillside homes with long gas runs can starve a tankless unit when it fires at maximum.
Check for scale and overheating
Hard-water scale can trigger lockouts that mimic ignition failure, so we check the heat exchanger flow too.
Replace, cycle and confirm
After replacement we run multiple ignition cycles at low and high flow to confirm reliable lighting.
Igniter Types in Cupertino Homes
Cupertino's housing mix means we see every ignition style.
- Wall-mounted tankless (Rinnai, Navien, Noritz) → electronic spark igniter plus flame rod
- Condensing tank water heater → hot-surface igniter on a control board
- Power-vent tank → electronic ignition with a pressure switch
- Standard gas tank in a garage → piezo igniter on the pilot
- Sealed FVIR tank → spark electrode inside the pilot assembly
- Heat pump or electric tank → no igniter required
Igniter parts on our trucks
- Hot-surface igniters for common tankless and condensing units
- Spark electrodes and igniter wires
- Flame rods
- Descaling pump kits
- Manometer and combustion analyzer
- Piezo igniters for standard tanks
Igniter Repairs Across Cupertino
Cupertino gets PG&E gas and water from San Jose Water or Cal Water depending on the area. Many homes, particularly larger remodels in Seven Springs, Monta Vista and Inspiration Heights, have exterior-mounted tankless units. Weather exposure, hard water and long gas runs all play a role in how those igniters wear.
- Seven Springs (95014): exterior-mounted tankless units with electronic ignition
- Monta Vista (95014): remodeled homes with condensing water heaters
- Inspiration Heights: hillside homes with long gas runs that affect ignition
- Rancho Rinconada (95014): Eichlers with standard tanks and piezo igniters
- Garden Gate: 1960s homes with power-vent replacements
- Linda Vista: family homes with high hot-water demand cycling the igniter often
- Cupertino Building Division (10300 Torre Ave.) oversees water heater permits; we pull them for any replacement work
If the unit lights but shuts down, read thermocouple replacement in Cupertino. For broader tankless issues, see tankless water heater repair Cupertino.
City Overview • Santa Clara County
Water Heater Igniter Replacement in Cupertino, CA — At a Glance
Cupertino is a mix of hillside custom homes, Eichler post-and-beam builds in Rancho Rinconada, and mid-century Monta Vista ranches. Eichler installs demand careful venting because there's no attic; hillside Inspiration Heights garages need custom drain-pan routing and CPC 507.2 seismic strapping tuned for raised foundations.
Permits pulled with
Cupertino Building Division
Utility
PG&E gas & electric
Local climate
Warm inland — western hillsides slightly cooler; low freeze risk
Housing stock we work on
Monta Vista mid-century • Rancho Rinconada Eichlers • Garden Gate ranch • Seven Springs custom
ZIP codes covered
- 95014
- 95015
Nearby landmarks
Apple Park • Stevens Creek Reservoir • Vallco/Main Street
Cupertino — Frequently Asked Questions
Which Cupertino ZIP codes do you cover?
Cupertino's primary ZIP is 95014, covering Monta Vista, Rancho Rinconada, Garden Gate, Seven Springs, Inspiration Heights, and the Stevens Creek corridor. We also cover the 95015 PO-box ZIP for scheduling purposes.
Do Cupertino water heater installs require a permit?
Yes. The City of Cupertino Building Division requires a plumbing permit for water heater installation and replacement. Cupertino inspectors verify CPC 507.2 seismic strapping, expansion tank on closed systems, T&P discharge routing, and combustion air/venting clearances.
Do you work on Monta Vista hillside garage installs?
Yes. Monta Vista and Inspiration Heights hillside garages often need custom venting runs, drain-pan routing to daylight, and seismic strapping upgraded for slab-on-grade to raised-foundation transitions. We scope these by site visit or photos before quoting.
How does Cupertino electric service affect heat-pump installs?
Cupertino is served by PG&E for both gas and electric. Heat-pump water heaters typically need a dedicated 30A/240V circuit — our in-house licensed electrician sizes the panel, pulls the electrical permit if needed, and coordinates the swap with the plumbing install.
Hot-Surface vs Spark Igniters
How it works
Hot-surface igniter: Glows red-hot to light the gas
Spark igniter: Sends an electric arc to light the gas
Common on
Hot-surface igniter: Condensing units, some tankless
Spark igniter: Most tankless units and FVIR pilots
How it fails
Hot-surface igniter: Cracks or burns out, no glow
Spark igniter: Worn electrode, weak or no spark
Our fix
Hot-surface igniter: Replace igniter, check board output
Spark igniter: Replace electrode, set the gap, check wiring
Brands We Service in Cupertino
Rinnai, Navien, Noritz, Rheem, A. O. Smith and Bradford White. Also see water heater repair Cupertino.
Hear clicking but smell gas? Stop pressing the button.
Repeated ignition attempts with a gas smell can be dangerous. Leave the house, call PG&E at 1-800-743-5000 or 911 from outside, then call us at (669) 337-9311.
Service hub
Broader water heater igniter replacement coverage in Cupertino.
Closest city pages
Nearest city hubs by drive time from Cupertino.
Frequently asked questions
Water heater won't light in Cupertino?
Call (669) 337-9311 — we restore ignition on tankless and premium tanks.
- Licensed CSLB #1008381
- Bonded & Insured
- Open 24/7
Navien Service Specialist · Rinnai PRO · Noritz Certified
