Igniter Replacement • San Jose

Water Heater Igniter Replacement in San Jose

Updated • By Joseph Castro, Owner • Licensed CSLB #1008381

There are three kinds of water heater igniters, and San Jose homes have all of them — push-button piezos on standard garage tanks, spark electrodes on power-vent units, and hot-surface igniters on many tankless models. Here's how to tell which one you have and what failure looks like.

  • Licensed CSLB #1008381
  • Same-Day Service When Available
  • Piezo, Spark & Hot-Surface Igniters
  • Tank & Tankless
  • Upfront Diagnosis
  • 4.8★ from 370 Google Reviews
Gloved hand pressing the piezo igniter button on a gas water heater in a San Jose garage

What this service covers

Igniter calls in San Jose break down by heater type. Here's what we repair most often across the city.

  • Piezo push-button igniters that click but don't spark
  • Cracked ceramic spark electrodes on FVIR pilot assemblies
  • Broken or chafed igniter wires inside the burner compartment
  • Hot-surface igniters on tankless units that crack after years of cycles
  • Flame rods that misreport the flame and cause repeated shutdowns
  • Spark gap adjustment so the arc reaches the pilot hood
  • Power-vent ignition control diagnosis on Rheem and A. O. Smith units
  • Tankless ignition error codes on Navien, Rinnai and Noritz

Which Igniter Does Your San Jose Water Heater Use?

Match your water heater style to the igniter type.

  • Standard gas tank with a red or black push button → piezo igniter
  • Newer FVIR tank with no visible pilot → sealed spark electrode in the pilot assembly
  • Power-vent tank with a fan on top and a plug → electronic spark or hot-surface ignition
  • Tankless water heater (Navien, Rinnai, Noritz) → electronic spark igniter plus flame rod
  • Condensing tank or high-efficiency unit → hot-surface igniter controlled by a board
  • Electric water heater → no igniter; uses heating elements instead

What Your San Jose Igniter Is Telling You

Listen and look — these clues narrow it down before we arrive.

1

Click, no spark

On a push-button tank, a click with no visible spark through the window means a failed piezo or a broken wire.

2

Spark, no flame

A spark that fires but the pilot won't catch usually means no gas at the pilot, a clogged orifice or a misaligned electrode.

3

Fan runs, then stops

On power-vent units, a fan that runs and then shuts down often means the igniter never reached temperature or the flame sensor didn't see flame.

4

Error code on a tankless

Ignition failure codes on Navien, Rinnai or Noritz usually trace to the igniter, flame rod, or gas supply.

5

Call with the symptom

Tell us what you heard and saw at (669) 337-9311; we'll bring the matching igniter.

Igniter parts on our trucks

  • Universal and OEM piezo igniters
  • FVIR pilot assemblies with spark electrodes
  • Hot-surface igniters for common tankless models
  • Flame rods and flame sensors
  • Igniter wires and connectors
  • Diagnostic meters for ignition controls

Igniter Repairs Across San Jose Neighborhoods

San Jose's mix of 1950s ranch homes, 1980s tract homes and newer Evergreen and Berryessa construction means every igniter type shows up here. Garage tanks get push-button piezos; newer homes increasingly have power-vent and tankless units with electronic ignition, each of which fails in its own way.

  • Willow Glen (95125): older garage tanks with worn piezo buttons and brittle wires
  • Evergreen (95121, 95148): tankless units with hot-surface or spark ignition faults
  • Berryessa (95132): power-vent tanks with electronic ignition controls
  • Cambrian (95124): FVIR tanks where the spark electrode is sealed in the pilot assembly
  • Almaden Valley (95120): larger homes with tankless or multiple water heaters
  • Alum Rock (95127): dusty garages that coat spark electrodes and weaken the arc
  • San Jose Building Division (200 E. Santa Clara St.) handles water heater permits; we pull them when a repair turns into a replacement

If the pilot lights but won't stay lit, read thermocouple replacement in San Jose. For tankless units, see tankless water heater repair San Jose.

City Overview • Santa Clara County

Water Heater Igniter Replacement in San Jose, CA — At a Glance

San Jose is our home market — we run 15+ water heater jobs per week across the 95110–95148 footprint. Every era of San Jose housing has its own quirks: 1920s Willow Glen bungalows almost always need gas-line upsizing for tankless, Almaden Valley slab-on-grade garages have their own seismic strapping approach, and 1970s Evergreen tract homes commonly need code-correction work on venting and expansion tanks during any replacement.

Neighborhoods routinely serviced from our San Jose dispatch — spokes represent typical response corridors, not exact geography.

Permits pulled with

San Jose Development Services

Utility

PG&E gas & electric

Local climate

Mediterranean — mild winters, dry summers; garage tanks rarely freeze

Housing stock we work on

1920s Willow Glen craftsman • 1950s Cambrian ranch • 1970s Almaden tract • modern North SJ townhome

ZIP codes covered

  • 95110
  • 95112
  • 95116
  • 95118
  • 95120
  • 95124
  • 95125
  • 95126
  • 95128
  • 95129
  • 95131
  • 95135
  • 95148

Nearby landmarks

Santana Row • Downtown SJ • Almaden Lake

See all San Jose water heater services →

San Jose — Frequently Asked Questions

  • Which San Jose ZIP codes do you cover?

    Every San Jose ZIP from 95110 through 95148, including 95110 Downtown, 95112 Japantown, 95116 East San Jose, 95118 Cambrian, 95120 Almaden Valley, 95124 Willow Glen–Cambrian, 95125 Willow Glen, 95126 Rose Garden, 95128 Burbank–Valley Fair, 95129 West San Jose, 95131 Berryessa, 95135 Evergreen, and 95148 Silver Creek.

  • Do San Jose water heater jobs require a permit?

    Yes. San Jose Development Services requires a plumbing permit for every water heater replacement and installation — including like-for-like tank swaps. Inspection covers CPC 507.2 seismic strapping, expansion tank, T&P discharge, combustion air, and vent clearance. We pull the permit and coordinate the inspection.

  • How fast can you get to my San Jose neighborhood?

    Willow Glen, Cambrian, Rose Garden, and Downtown typically see a tech within 2–4 hours. Almaden Valley, Evergreen, Berryessa, and Silver Creek are on 3–5 hour windows depending on the day. Same-day is available across all 13 ZIPs when scheduling allows.

  • Do you understand San Jose's older housing stock?

    Yes. We work daily in 1920s Willow Glen craftsman bungalows with half-inch black-iron gas mains, 1950s Cambrian ranches with atmospheric-vent tanks in closets, 1970s Almaden tract homes with garage installs, and modern North San Jose townhomes with tankless conversions. Each era needs a different scope.

Igniter Replacement vs Control Board

Symptom

Igniter is the problem: No spark or no glow at the igniter

Control board is the problem: Igniter tests good but never gets power

How we test

Igniter is the problem: Resistance and spark checks on the igniter

Control board is the problem: Voltage output checks at the board

Common on

Igniter is the problem: Standard tanks and older tankless units

Control board is the problem: Power-vent and newer tankless units

Fix

Igniter is the problem: Replace igniter or electrode

Control board is the problem: Replace control board or ignition module

Not sure which path fits your situation?

Call (669) 337-9311Get Phone Estimate

Brands We Repair Igniters On in San Jose

Rheem, A. O. Smith, Bradford White, State, Navien, Rinnai and Noritz. See also water heater repair San Jose.

Hear clicking but smell gas? Stop pressing the button.

Repeated ignition attempts with a gas smell can be dangerous. Leave the house, call PG&E at 1-800-743-5000 or 911 from outside, then call us at (669) 337-9311.

Service hub

Broader water heater igniter replacement coverage in San Jose.

Closest city pages

Nearest city hubs by drive time from San Jose.

Frequently asked questions

A click with no spark usually means a worn piezo igniter or a broken wire. A spark with no flame means gas isn't reaching the pilot or the electrode is misaligned.

Clicking, but no flame in San Jose?

Call (669) 337-9311 — we'll identify your igniter and replace the right part.

  • Licensed CSLB #1008381
  • Bonded & Insured
  • Open 24/7

Navien Service Specialist · Rinnai PRO · Noritz Certified